Pago con tarjeta de crédito
Para este producto las cuotas son:
| 1 cuota de: | Q570.96 |
| 3 cuotas de: | Q193.06 |
| 6 cuotas de: | Q97.91 |
| 10 cuotas de: | Q60.39 |
| 12 cuotas de: | Q51.01 |
Preamplificador Marca Art DjpreII Para Tornamesas
Entradas y salidas tipo RCA, Terminal de tierra
Alimentación: 12V DC (adaptador incluido)
El DJ PRE II es un preamplificador phono de alta calidad diseñado para su hogar y estudio
Actúa como interfaz entre el tocadiscos y el sistema de grabación de audio
La capacidad de entrada analógica se puede cambiar entre 100pF y 200pF para optimizar la respuesta de la capsula del tocadiscos
Un filtro que elimina estruendo del plato giratorio del tocadiscos y dejar el audio original
¡Entrega inmediata!
Precio: Q549
Cantidad
|
|
Descripción del fabricante
The DJ PRE II is a high quality Phono preamp designed for your home and studio.
It acts as an interface between your turntable and your audio recording system.
The analog input capacitance can be switched between 100pf and 200pf to optimize
your phono cartridge response. A switchable low cut filter removes turntable
rumble while leaving the audio pristine. The front gain trim control and
signal/clip LED allow you to optimize the preamps gain for a wide range of input
sources. The built-in low noise Phono preamp circuitry is highly accurate and
precisely conforms to the RIAA standard. The Line Output jacks are low impedance
and can work with any sound card. Housed in an all aluminum black anodized case,
the DJ PRE II can be powered by a wide variety of external supplies. If you need
to amplify and EQ your vinyl records to interface with your audio workstation,
sound card, or main monitor system, the DJ PRE II gives you flawless audio
reproduction in a rugged and reliable package. Frequency Response: 10Hz ?50KHz,
+/-.5dB THD: .01% Typical @ 1KHz Hum and Noise: >90dB below clipping Input
Impedance: 47k Ohms in parallel with either 100pF or 200pF Maximum Input Level:
40mVrms @1KHz Maximum Gain: 45dB @ 1KHz Input / Output Connections: RCA Maximum
Output Level: +6dBu (1.4Vrms) Filter Type/Response: Switchable, Low Cut, -3dB @
22Hz Power Requirements: 7-12V DC or 9-12V AC @ 150mA Dimensions: 1.75?H x 4.2?W
x 3.5?D (44.5mm x 107mm x 89mm)...
|
Escribe una pregunta o comentario sobre este producto:
